Stage 5:-

  Step 36 

Select colour black and spray 3">

 

 

Stage 5:-

  Step 36 

Select colour black and spray 3, 20, 20 the upper edge of the foreground and fill in below.

  How to use Paint Shop Pro Tools  
  Step 37a 

Set push brush to 9, 40, round and push up black to form the trunk and a few main branches of the tree. Don't worry about precision here. A lot of this will get covered up in succeeding steps.

  How to use Paint Shop Pro Tools  
  Step 37b 

Push (4, 20, round) smaller branches then set push brush to 2, 20, round and push even smaller branches. Again, a lot of this will get covered up.

  How to use Paint Shop Pro Tools  
  Step 37c 

Set spray brush to 3, 30, 30 and use tight circular motions in a continuous spray of foliage and add a small tree at the base of the big tree. Select color 151, 117, 77 and spray (1, 12, 16) shadow detail on the tree.

  How to use Paint Shop Pro Tools  
  Step 37d 

Select colour 19, 43, 110 and spray (1, 12, 16) a medium highlight primarily along the edges of the tree but let a little mix all the way into the shadow side. Select colour 32, 100, 176 and spray (1, 20, 20) highlight on the most outer edges. You don't need a lot of this colour so don't get carried away.

  How to use Paint Shop Pro Tools  
  Step 38a 

Select colour 8, 123, 60 and spray (1, 16, 16) dirt on the foreground. Build up the colour and leave some open dark areas.

  How to use Paint Shop Pro Tools  
  Step 38b 

Select colour 150, 41, 165 and spray some bare rock areas.

  How to use Paint Shop Pro Tools  
  Step 38c 

Select colour 81, 96, 32 and spray (1, 16, 16) a dark green under foliage. Don't cover up all the black areas.

  How to use Paint Shop Pro Tools  
  Step 38d 

Select colour 30, 121, 151 and spray (1, 8, 10) highlight where the sunlight is punching thru.

  How to use Paint Shop Pro Tools  
  Step 39 

Select colour 81, 96, 32 and spray (2, 16, 16) the under foliage of both the big and small tree. Change colour to 52, 101, 97 and set spray brush to 1, 16, 16 and add highlight to the foliage primarily around the edges.

  How to use Paint Shop Pro Tools  
  Step 40 

And now, the final effect. (optional) Image, normal filters, sharpen. Select colour black and draw hollow rectangle (width=12) to form a border. 

That's it, you did it !!! Isn't this FUN

  How to use Paint Shop Pro Tools  

That's it You have finished, Now try and create your own picture.  Remember that the bigger the canvas the more memory you may need in your computer.

Back to start of Digitoils Tutorial

Home