Stage 3:-

Now this is a tricky bit but very effective.  You are going to copy a section of the picture and paste it back onto the picture and then turn it upside down. Step 19 

With the select tool set to rectangle">

 

 

Stage 3:-

Now this is a tricky bit but very effective.  You are going to copy a section of the picture and paste it back onto the picture and then turn it upside down. Step 19 

With the select tool set to rectangle, 0 feather; start lower left (0,204) and stop upper right (300,105). Edit-Copy, Edit-Paste as New Selection, left click. You can paste it anywhere within the image and you should now see a moving line around the selection.

  How to use Paint Shop Pro Tools  
  Step 20 

Next: Image-Flip, 
Image- Deformations- Motion Blur (direction=180, intensity=10), OK. Grab the selection and position it directly under the mountain, right click. Instant reflection You can also, before you right click, adjust the selection's colour, hue, intensity, and so on, to achieve the effect you want.

  How to use Paint Shop Pro Tools  
  Step 21 

Now Select colour 154,86,46 and spray 2,20,20 a distant tree line where the mountain and reflection meet. Don't worry about precision at this point.

  How to use Paint Shop Pro Tools  
  Step 22 

Change the spray settings to 4,20,20 and fill in a ground.

  How to use Paint Shop Pro Tools  
  Step 23 

Set the push brush to 1,30,round and push up detail from the ground to the tops of trees. Next I'll add highlights.

  How to use Paint Shop Pro Tools  
  Step 24 

Select colour 71,89,103 and spray 1,16,20 the darker green areas with continuous movements, allowing the brush to linger in a spot here and there and barely brushing other areas. Let some base colour show thru.

  How to use Paint Shop Pro Tools  
  Step 25 

Select colour 13,94,103 and spray (with same settings) brownish areas. You can see a thick, lush foliage begin to appear. Be sure to spray along the water edge line.

  How to use Paint Shop Pro Tools  
  Step26 

Select colour 50,124,153 and spray (using same settings) a lighter green to indicate spots of sunlight striking the foliage.

  How to use Paint Shop Pro Tools  
  Step 27 

Set push brush to 10, 16, horizontal and with short downward strokes, pull the base of the ground into the water. Then select colour 37, 84, 216 and spray 1, 16, 20 a waterline at the shore.

Click Here to go to the Stage 4

Back to start of Digitoils Tutorial